Electrical Meter: Facilitating Energy Management and Control

A home, building, or other electrically powered equipment’s electrical energy usage can be measured with the help of an electric meter. They are designed to offer clients with proper data for billing. The functioning of an analog electric meter can be reduced to that of an electric motor, even though it uses a variety of coils and gears.

A metal disc responds to the changing magnetic fields created by the electric current flowing through the coils. The disc spins in direct proportion to the amount of electricity utilized with the aid of a permanent magnet. Gears are turned by their motion, and the reading is then displayed on a dial resembling a clock.

Digital meters merely report the total amount of electricity consumed in kWh. The power provider deducts the start from the end to determine how much to charge the home, thus it’s vital to remember that neither the digital nor the analog meters reset at the beginning of the month. People don’t need to trek through neighbourhoods inspecting everyone’s meters because digital meters can frequently interact with the electricity company immediately.

Usage of Electric Meter

Regardless of the type of meter, it monitors electricity consumption in watts, or more precisely, kilowatt-hours. A watt is equal to one-volt times one amp, or one amp times one ampere (or current), in an electrical circuit. But the electrical potential is only measured by this formula.

Include a component of time when calculating actual energy consumption. Thus, the number of watts used over a period is a measure of electrical usage. Kilowatt-hours are the unit of measurement for electricity on the meter. One kilowatt-hour is equal to 1,000 watt-hours.

How to Read a Mechanical Electric Meter?

One needs a starting point and an ending point to track their electricity usage. Take an initial reading on the first of the month, followed by a second reading at the end of the last day of the month, to determine how much electricity you consume in a month. Calculate monthly electricity usage from the difference between the two figures.

Start with the number on the meter’s far-left dial and read towards the right to get a reading. Each number should be entered from left to right. Let’s assume that your original reading (at the start of the month) was 01050. The second reading, taken at the month’s end, reads 02050. 02050 – 01050 = 1000; subtract the lower reading from the upper reading. This indicates that during the month, you utilized 1,000 kilowatt-hours.

One thing to keep in mind is that the reading should be recorded as a smaller number if the dial is between digits. For instance, the reading would be recorded as a 1 until it passed the 2 on the dial if the dial was between 1 and 2. Also, observe that the first, third, and fifth dial numbers run clockwise while the second and fourth dial numbers go counter-clockwise when one looks at the five dials. This is typical and unworthy of worry.

How to Choose the Best Electric Meter for any Facility?

Electric meters are significant in determining the usage of electricity. Therefore, the decision you make to choose a supplier should be the right one. There are several manufacturers that you can find online but associate with the one with experience and offers good quality.

You can talk to these suppliers through their email IDs and phone numbers available on their website. Once you have chosen your supplier, communicate all your requirements. The top-notch companies can help you with the installation of an electric meter and even offer discounts. Therefore, ensure that the supplier that you choose caters to your requirement in the best possible way without compromising on quality

Back to top button